Skip to main content
search

GBE Pre-PASS (Collaborate) G#1105 N#1123

By 8 August 2014January 10th, 2017Collaboration, GBE PASS, Services

GBE > Advertise > Collaborate > Services > G#1105 N#1123

GBE Pre-PASS (About)

GBE Pre-PASS (Collaborate)
Product Accessory System Screening
About: 


Nobody appreciates to be told they failed and then be sent an invoice for the test

To avoid the risk of an assessment leading to failure, GBE preview products and make sure we are confident it will pass before invoicing for the assessment fee.

If it won’t pass we decline to assess it, if its borderline we will inform the client, they decide to go ahead or not.


What do we consider in the prePASS assessment?

prePASS assessment Schedule (A02 update)

  • Who is promoting the product for prePASS assessment?
  • Manufacturer’s Company Name:
  • Agent’s Company Name:
  • Supplier’s Company Name:
  • Country of manufacture:
  • Contact details: (will not be published)
  • Contact’s Fore and Surname:
    • (will not be published)
  • Telephone:
    • (will not be published)
  • Mobile:
    • (will not be published)
  • Email:
    • (will not be published)
  • Description:
  • Product Reference:
    • (and model number, if relevent)
  • CAWS work section:
  • Application:
    • (promoted by the manufacturer)
  • Building Element(s) used in:
    • (walls, floors, roofs, etc.)
  • Where located in element?
    • (Inside/within/outside/framing zone/cavity)
  • Primary Function used for:
  • Why is this product greener than products in the same application
  • Which product is it competing with/replacing?
  • What materials is it made of?
    • (all of them and % if more than one)
  • Size:
  • Manufacturing standard:
    • standard/norm/certificate?
  • How is it installed?
  • Application standard:
    • Code/Standard/certificate?
  • What other accessories are essential to its use and performance
  • Are there any independent evaluations of the product?
  • Are there any lables?
  • Are there any certificates?
  • Are there any assessments?
  • Are there any endorsements?
  • Are there any accolades?

PASS ASSESSMENT

The assessment is detailed elsewhere


Some products don’t make the grade here is an example:

Internal lining system with vapour closed panels made partly of recycled plastics

Many thanks for your enquiry. We have had a close look at the product with a view to its overall environmental impact as well as its contribution towards robust construction.
• The fact that the panel employs 50% recycle is highly laudable – but in terms of overall impact, there is still half of the product generated from new plastic. Acrylic, derived from crude oil (a limited resource) has a lesser impact than PVC (a rival material in this application), but we still feel that, in environmental terms, it doesn’t match the benefits of traditional ceramic tiling (derived from an abundant resource).
• The insulation claims appear to be a little bit far-fetched. In reality there is likely to be little or no significant insulation benefit – though if evidence from using appropriate test methodology were available, the claim could be more adequately tested.
• We had concern about the soundness of the construction as a product of applying the sheeting. Generating a cavity in a wall behind what is effectively a vapour barrier, leads to the risk of moisture ingressing through a solid wall and condensing into the cavity to cause mould  – this would be a particular problem in winter and in cold climates.
• Another concern was that applying a flexible sheet over a cavity would introduce a degree of flexing which might well induce movement at perimeters and joints. Where joints are horizontal, leakage might be a risk. Very small / nil tolerances are critical in wet areas  and we’re not sure they can be obtained consistently when using the sheeting in practice.
In conclusion, though we applaud the effort to reduce plastic waste, we’re very sorry to say that this is not a construction material or type that we feel we can endorse.

@ GBE NGS ASWS BrianSpecMan aka Brian Murphy
11th September 2013 – 10th January 2017

GBE Pre-PASS (Collaborate)
Images: 


GreenSpec Pre-PASS png

Fig. 3 pre-PASS screening data gathering schedule
(Rev A02 4 new rows added)


@ GBE NGS ASWS BrianSpecMan aka Brian Murphy
15th September 2013 – 10th January 2017

GBE Pre-PASS (Collaborate)
See Also:


GBE Files


GBE Jargon Buster

  • Accessories
  • Accolades
  • Agent or Supplier’s Name
  • Application
  • Assessments
  • Building Element
  • Certificates
  • Contact details
  • Contact’s Name
  • Endorsements
  • Evaluations
  • Manufacturer’s Name
  • Lables
  • PASS assessment
  • Performance
  • Primary Function
  • Product Reference and model number

GBE Images Navigation G#3890


@ GBE NGS ASWS BrianSpecMan aka Brian Murphy
11th September 2013 – 10th January 2017

Leave a Reply

Close Menu