Skip to main content
search

Enviroform Solutions Ltd G#4728

By 20 November 2015June 9th, 2019Encyclopaedia, Manufacturer, Products

GBE > Encyclopaedia > Products > Manufacturer G#4728

Enviroform Solutions Ltd.


GBE Blog > News

Enviroform Solutions Ltd.

Tabs including * indicates there is information for this Company

Enviroform Solutions Ltd.
GBE Image Gallery


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 9th January 2016

Enviroform Solutions Ltd.

GBE Manufacturer


Company name:  Enviroform Solutions Ltd.
Address:  Unit 16, Milltown Industrial Estate, Upper Dromore Road,
City:  Warrenpoint
County:  Co. Down
Country:  Ireland
Postcode:  BT34 3PN
T:  028 4177 3314
M:  07730 76638
E:  liam@enviroformsolutions.com
W:  www.enviroformsolutions.com

Opening hours 9-5 (visits by appointment only)


Social Media:

Social Media  
Twitter  
Facebook  

Company Supply Chain Activity: Inventor/Designer/Assembler/Supplier


Company Promotion:

Draft Text

INTRODUCTION

Cold Thermal Bridging in External Wall Insulation (EWI)

Enviroform Solutions Ltd. have developed a number of unique products using Aerogel thermal conductivity insulation combined with various materials, to tackle the issue of cold thermal bridging and weathering at key junctions when installing External Wall Insulation is retrofitted to existing external solid walls.

The Key Junctions in question addressed are:

  • 1 Windows & Door: Reveals & Sills
  • 2 Soil Pipes & Gate Posts / Fences
  • 3 Eaves & Gutter: where little or no overhanging soffit exists
  • 4 Lead Flashing Details: Bay windows to walls – Single storey beside two storey; EWI above pitched roof
  • 5 Below DPMC Level: above ground level

Failure to identify and adequately deal with these cold thermal bridging elements can lead to

  • A Increased heat loss from a dwelling compared with what was assumed determined during energy modelling.
  • The Risk of surface condensation or mould from lowered internal Surface temperature at or near the Thermal Bridge Junction.
  • C Risk of mould growth from spores in surface condensation at or near the Thermal Bridge Junction.

By introducing the Thermo-Pro® Soil Pipe insulated profile the linear thermal transmittance is reduced by over 70% and the internal surface temperature is increased by 2.2oC significantly reducing the risk of surface condensation reducing the risk of mould and creating an unhealthy indoor environment.


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 9th January 2016

Enviroform Solutions Ltd.

GBE Incubator


Draft Text

INTRODUCTION

Cold Thermal Bridging in External Wall Insulation (EWI)

Enviroform Solutions Ltd. have developed a number of unique products using Aerogel thermal conductivity insulation combined with various materials, to tackle the issue of cold thermal bridging and weathering at key junctions when installing External Wall Insulation.

The Key Junctions in question addressed are:

  • 1 Windows & Door: Reveals & Sills
  • 2 Soil Pipes & Gate Posts / Fences
  • 3 Eaves & Gutter: where little or no overhanging soffit exists
  • 4 Lead Flashing Details: Bay windows to walls – Single storey beside two storey; EWI above pitched roof
  • 5 Below DPMC Level: above ground level

Failure to identify and adequately deal with these cold thermal bridging elements can lead to

  • A Increased heat loss from a dwelling compared with what was assumed determined during energy modelling.
  • B The Risk of surface condensation or mould from lowered internal Surface temperature at or near the Thermal Bridge Junction.
  • C Risk of mould growth from spores in surface condensation at or near the Thermal Bridge Junction.

By introducing the Thermo-Pro® Soil Pipe insulated profile the linear thermal transmittance is reduced by over 70% and the internal surface temperature is increased by 2.2oC significantly reducing the risk of surface condensation reducing the risk of mould and creating an unhealthy indoor environment.

GBE Incubator

GBEIncubatorProductScheduleA01BRM161215 PDF

GBEIncubatorProductSchedule

  • For
    • What are this Company’s environmental credentials?
  • Against
    • How can this Company improve?
  • Comments

© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 6th January 2016

Enviroform Solutions Ltd.

GBE COMPASS

 


GBE Collaborate Services

  • GBE Compass

Pending

Document


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 3rd January 2016

Enviroform Solutions Ltd.

GBE Library

External Wall Insulation (EWI) Accessories


Thermo-Pro Brochure (Multiple Accessory Brochure)
EnviroformThermoProGuide


See Also: In Accessory Pages

Magnaline Reveal Info & Install

EnviroformMagnalineRevealInstall


steelboxwindowsectionAeroegl


EnviroformHollowSteelInsulatedCladding


CDL Soil Pipe

ConstructiveDetails6Enviroform


CDL Bead Soofit & Trac

ConstructiveDetails8Enviroform

GBE LCA & EPD

Sub-system Component

Spaceloft EPD

SpaceLoftAerogelEPD


GBE Manufacturer’s CPD

Internal Wall Insulation (IWI) Accessories

Enviro-Informed Family Presentation (PDF) (Multiple Accessory Presentation)

EnviroInformedSolutionsFamily


GBE Accessories

Internal Wall Insulation (IWI) Accessories

ThermoSoc Information & Installation Guide

EnviroformThermoSocInstallGuide


Thermo-Soc Report

EnviroformThermoSocEvaluations


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 9th June 2019

Enviroform Solutions Ltd.

GBE Company Data Sheet


GBE Collaborate Services


Pending

Document


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 9th June 2019

Enviroform Solutions Ltd.

GBE Products

See Tab 8 Accessories


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
5th December 2015 – 3rd January 2016

Enviroform Solutions Ltd.


GBE Accessories


  • Thermo-Pro Thermally insulated profiles for EWI (External wall insulation)
  • 1 Thermo-Bead
    • (Window/Door Reveal Lining for EWI)
  • 2 Thermo-Pro Soil Pipe
    • (behind vertical and sloping pipes & other abutments in EWI)
  • 3 Thermo-Pro Fascia
    • (EWI abutments at eaves with little or no overhang)
  • 4 Thermo-Pro Finlock
    • (Precast concrete gutter Fascia
  • 5 Thermo-Pro Eaves/Gutter
    • (abutments for EWI)
  • 6 Thermo-Flash (Gutter Fascia)
  • 7 Thermo-Flash
    • (Lead Flashing for EWI to pitched roof)
  • 8 Thermo-Trac
    • (Below DPC EWI skirting with RWP cutout)
  • 9 Thermo-Trac Dynamic
  • 10 Thermo-Pro Column Cladding Insulation
  • External Floor/Walkway and roof terrace/balcony insulation systems
    • Underside:
      •  Floor Soffit Cable trunking Insulation
        • Thermo-Pro Thermally insulated profiles for IWI
  • Thermo-Pro Thermally insulated profiles/Accessories for IWI (Internal Wall Insulated lining)
    • 8 Thermo-Soc
      • (Thermal break for electrical socket in IWI)
    • 9 Magna-Reveal (Jamb lining for IWI)
    • 10 DIY Thermal Reveal/Return Kit
    • 11 Thermo-Joist
  • Solid Wall Masonry Accessories
    1. Sil-T Vapour permeable biocide sealer for masonry
    2. SIL-T20 Vapour permeable Impregnating Adhesive

© GBE NGS ASWS BrianSpecMan aka Brian Murphy
5th December 2015 – 9th June 2019

Enviroform Solutions Ltd.


GBE Systems

GBE Sub-systems

  • EWI External Wall Insulation System by Enviroform Solutions Ltd.
    • External Wall & Walkway/Balcony/Roof Parapet Sides
    • Renderline Superslim
  • IWI internal wall insulation by others
    • Thermo-Soc Accessory by Enviroform Solutions Ltd.
  • IWI internal wall insulation by Enviroform Solutions Ltd.
    • E-line Superslim
    • E-Line Slim
    • E-line Natural
    • E-Line Natural-Hybrid
  • Square hollow steel columns by others
    • Insulating cladding by Enviroform Solutions Ltd.
  • Ultratherm Aerogel Flooring for retrofit
    • E-Therm Slim Floor
      • (Insulated Dry Floor System)
  • External Floor/Walkway and roof terrace/balcony insulation systems
    • Topside:
      • Instaline Superslim Balcony Insulation Solution
      • CTF (Cut to Fall) Superslim Balcony/Terrace Insulation Solution
      • Cut to fall Balcony Insulation
    • Parapet Side:
      • Renderline Superslim
    • Underside:
      • E-Line (all 4 systems?)
    • Underside Accessories:
      • Floor Soffit Cable/Pipe tray Insulation
  • Pitched Roof Insulation
    • Within Batten Zone

© GBE NGS ASWS BrianSpecMan aka Brian Murphy
5th December 2015 – 9th June 2019

Enviroform Solutions Ltd.

GBE Products Accessory System Matrix

GBE Collaborate Services


Pending

Document


Products + Accessories = Systems

  • Accessories
    • Thermo-Pro Thermally insulated profiles for EWI
      • Thermo-Bead Reveal Lining for EWI)
      • Thermo-Pro Soil Pipe (behind pipes & abutments in EWI)
      • Thermo-Pro Rainwater Fascia (abutments for EWI)
      • Thermo-Pro Eaves/Gutter (abutments for EWI)
      • Thermo-Flash (Lead Flashing for EWI)
      • Thermo-Trac (Below DPC EWI)
    • Thermo-Soc
      • Thermal break for electrical socket in IWI internal insulated lining
    • Magna-Reveal (Jamb lining for IWI)
    • DIY Thermal Reveal Kit
    • Sil-T Vapour permeable biocide sealer for masonry
    • SIL-T20 Vapour permeable Impregnating Adhesive
  • Sub-systems
    • IWI internal wall insulation by others
      • Therm0-Soc Accessory by Enviroform Solutions Ltd.
    • IWI internal wall insulation by Enviroform Solutions Ltd.
      • E-line Superslim
      • E-Line Slim
      • E-line Natural
      • E-Line Natural-Hybrid
    • EWI External Wall Insulation System by others
      • Accessories by Enviroform Solutions Ltd. 
    • Square hollow steel columns by others
      • insulating cladding by Enviroform Solutions Ltd.
    • Ultratherm Aerogel Flooring for retrofit
    • E-Therm Slim Floor
      • Insulated Dry Floor System

Elemental Applications v Systems


Complimentary / Accredited Systems

  • K11 Insulation with dry lined finish
  • M21 Insulation with Render Finish

Work section and Clause numbers

  • CAWS/NBS Building Work section: [____]
  • NBS/NGS clause number:  [____]
  • Uniclass/NBS Create Work section: [________]
  • NBS Create/NGS clause number: [________]

© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 9th June 2019

Enviroform Solutions Ltd.

GBE Elemental Assemblies

ELEMENTAL ASSEMBLIES: Solid Masonry External Walls Retrofit IWI or EWI


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
5th December 2015 – 9th June 2019

Enviroform Solutions Ltd.

GBE Suppliers

Company Supply Chain Activities: Inventor/Designer/Assembler/Supply Direct


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 9th June 2019

Enviroform Solutions Ltd.

GBE Installers/Applicators

COMPANY NAME: Many

  • Any EWI Manufacturer Approved Installer/Applicator
  • No specialist needed
  • Suitable for DIY Do It Yourself (bespoke product for DIY)
  • Suitable for BIY Build it Yourself (Self-Build)

© GBE NGS ASWS BrianSpecMan aka Brian Murphy
14th December 2015 – 29th December 2015

Enviroform Solutions Ltd.

GBE Echo

GBE Collaborate Services:

  • GBE Echo
  • Manufacturer’s Environmental Self-Declaration to ISO 14021
  • Independent Validation of Manufacturer’s claim to ISO 14021
  • Report
  • Evidence Documents
  • Factory Visits
  • Public Disclosure Document Schedule
  • URL to Repository for Public Disclosure Documents
  • 301 Redirects to maintain links

Pending

Document


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 9th January 2016

Enviroform Solutions Ltd.

EPD Environmental Product Declaration

This EPD is for the Aerogel insulation only

It was carried out Renuables (UK Consultant and later Sub-Partner of CAPEM LCA & EPD project)

Spaceloft EPD PDF

SpaceLoftAerogelEPD


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
7th December 2015 – 30th December 2015

Enviroform Solutions Ltd.
See Also:


GBE Portfolio


GBE Jargon Buster


GBE Checklist


GBE Code


GBE Q&A


GBE Defects

  • External Wall Insulation: Insulation with Rendered Finish
  • GreenDeal & ECO failings

GBE CPD

Theme


GBS Robust Specification Clauses (RSC)

GBE Robust Specification Work Section (RSW)

GBE Robust Specification System Clause (RSS)

GBE Robust Specifications Accessory Clause (RSA)


© GBE NGS ASWS BrianSpecMan aka Brian Murphy
30th January 2016 – 9th June 2019

© GBE NGS ASWS BrianSpecMan aka Brian Murphy
5th December 2015 – 9th June 2019

Leave a Reply

Close Menu