Thermo-Pro EWI Thermal Breaks (RSW) M21 G#9479

GBE > Encyclopaedia > Files > Specifications > Work Sections > G#9479

GBS Robust Specification Work Section:
GBS M21 Insulation With Rendered Finish
Thermo-Pro EWI Thermal Breaks (RSW) M21 G#9479

Use with NBS Specification M21 and merge in

Draft Specification clauses

M21 INSULATION WITH RENDERED FINISH (EXTERNAL WALL INSULATION EWI)

To be read with the Preliminaries/General conditions[ A10-A55 and A90]

210E EXTERNAL WALL INSULATION SYSTEM (EWIS)

Drawing Reference(s): [________]
Performance:
U value: [________] W/m2.K
No thermal bridges at abutments, openings, services.
Structural background/Substrate: [Masonry/Brickwork]
Preparation: [
Remove and reclaim to refit rainwater gutters and down pipes
Remove and reclaim to recycle lead flashings]
Pretreatment: Fungicidal wash if recommended by system manufacturer.
Insulated thermal break edge profiles to M21/260E
EWIS:
Manufacturer: [________]
Product Reference: [________]
BBA Agrément Certificate No.: [____/____]
Insulation material: [________]
Thickness: [________] mm.
Density: [________] kg/m³.
Minimum compressive strength: [________] kN/m².
Method of fixing: [________]
Render Base coat: [________]
Render carrier/Reinforcement mesh: [________]
Method of fixing: [________]
Corner reinforcement beads: [________]
Abutment stop beads: [________]
Render: [________]
Decorative finish: [________]

Insulated Thermal Break Edge Profiles for EWI
260E INSULATED THERMAL BREAK EDGE PROFILES FOR EWI

Drawing Reference(s): [________]
Constructive Details Ltd.:
CD0058 Thermo-Pro Soil Pipe
CD0107 Thermo-Bead
CD0108 Thermo-Trac
CD0109 Thermo-Pro Fascia
Reference Documents:
Constructive Details Ltd.:
A handbook of thermal bridging details incorporating Instaclad insulated thermal profile solutions
Book 6 — Thermo-Pro Soil Pipe solution for insulating on retrofit External Wall Insulation
Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
External wall insulation system: See M21/210E
System Reference: Thermo-Pro®
Accessory References: [
1 THERMO-BEAD See M21/265E
2 THERMO-PRO SOIL PIPE See M21/270E
3 THERMO-PRO FASCIA See M21/275E
4a THERMO-FLASH LEAD See M21/280E
4b THERMO-FLASH ALUMINIUM See M21/281E
5a THERMO-TRAC See M21/285E
5b THERMO-TRAC DYNAMIC See M21/286E
6 THERMO-PRO GUTTER BOX M21/276E]
Manufacturer: Enviroform Solutions Ltd. Unit 16, Milltown Industrial Estate, Upper Dromore Road, Warrenpoint, Co. Down, BT34 3PN, Ireland.
T 028 4177 3314 M 07730 766038
E liam@enviroformsolutions.com W http://www.enviroformsolutions.com
Contact: Liam Brown, Managing Director
Supplier: Enviroform Solutions Ltd.
Installer: [Main Contractor/EWIS Contractor/Sub-contractor/Trade Contractor]
Checking and verification of installation: Use the Guidance Checklist in the Constructive Details handbooks [6 & 8]
Provide 2 copies of the completed checklist, signed by the installer’s Director, to the CA upon completion.

Thermal Break To Window/Door Opening Jambs Within EWI
260E THERMAL BREAK TO WINDOW/DOOR OPENING JAMBS WITHIN EWI

Drawing Reference(s): [________]
Constructive Details Ltd.:
CD0107 Thermo-Bead
Reference Documents:
Constructive Details Ltd.:
A handbook of thermal bridging details incorporating Instaclad insulated themal profile solutions
Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
Substrate: Existing 1 Brick thick solid brick/masonry wall; fair faced externally; plastered internally.
Existing window or door in position against masonry opening jamb.
Opening Jamb Insulation Bead: Thermal conductivity insulation to jamb, from outer face of window/door to outer face of masonry.
Thermal Conductivity Insulation:
Insulation Material: Aerogel
Product Reference: Spaceloft Aerogel
Manufacturer: Aspen Aerogels Inc. USA
Thickness: [5/10] mm
Protection: Vapour Control Layer: Foil wrapped Insulation
Product Reference: Thermo-Pro Thermo-Bead
Model Reference & Size: [
TB5/1: 5 x 50 x (cut from) 2500 mm.
TB5/2: 5 x 75 x (cut from) 2500 mm.
TB5/3: 5 x 100 x (cut from) 2500 mm.
TB5/4: 5 x 125 x (cut from) 2500 mm.
TB5/5: 5 x 150 x (cut from) 2500 mm.
TB10/7: 10 x 50 x (cut from) 2500 mm.
TB10/8: 10 x 75 x (cut from) 2500 mm.
TB10/9: 10 x 100 x (cut from) 2500 mm.
TB10/10: 10 x 125 x (cut from) 2500 mm.
TB10/11: 10 x 150 x (cut from) 2500 mm.]
Profile: pressed/extruded angle
Metal: Aluminium
Finish: Powder coated to work section Z31
Colour: not exposed, no colour requirements,
Colour: [______], RAL/BS 4800: [________].
Gloss level: [________] %
Installation: See M21/390E
Fasteners: assuming brickwork and lime mortar
Material: [________]
Type: [________]
Size: [________]
Spacing: [________]
Apply insulation across opening jamb, against both masonry and fixed window/door frame, with angle bead outwards from opening jamb in contact with outer-face of fixed frame of window/door, to receive render system.

Thermal Break Profiles Behind Soil Pipe Within EWI
270E THERMAL BREAK PROFILES BEHIND SOIL PIPE WITHIN EWI

Drawing Reference(s): [________]
Constructive Details Ltd.:
CD0058 Thermo-Pro Soil Pipe
CD0109 Thermo-Pro Fascia
Reference Documents:
Constructive Details Ltd.:
A handbook of thermal bridging details incorporating Instaclad insulated thermal profile solutions
Book 6 — Thermo-Pro Soil Pipe solution for insulating on retrofit External Wall Insulation
Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around abutments.
Applications: Abutments with not-relocatable [gate posts, fences, soil pipes, etc.]
Sequence: Existing: Soil pipe, Profiles next, EWI last.
Thermal Conductivity Insulation:
Vapour Control Layer Comprar levitra en quito ecuador Foil wrapped Insulation
Insulation Material: Aerogel
Product Reference: Spaceloft Aerogel
Manufacturer: Aspen Aerogels Inc. USA
Thickness: 10 mm
Insulation VCL Bonded to back of metal profiles
Profiles: pressed/extruded interlocking profiles
Metal: Aluminium
Finish: Powder coated to work section Z31
Colour: [______], RAL/BS 4800: [________].
Gloss level: [________] %
Product Reference: Thermo-Pro® Soil Pipe
Model Reference: TPSP1 & TPSP2,
Profile: Z side profile & Z Insulated Profile
European Patent No. 2703574
Fasteners: assuming brickwork and lime mortar
Material: [________]
Type: [________]
Size: [________]
Spacing: [________]

Thermal Break Flashing Profile below Eaves, behind Rainwater Gutter & above EWI
275E THERMAL BREAK FLASHING PROFILE BELOW EAVES, BEHIND RAINWATER GUTTER & ABOVE EWI

Drawing Reference(s): [________]
Constructive Details Ltd.:
CD0109 Thermo-Pro Fascia
Reference Documents:
Constructive Details Ltd.:
A handbook of thermal bridging details incorporating Instaclad insulated themal profile solutions
Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around eaves abutments and services.
Applications:
Abutments with removable and relocatable refixable rainwater gutters and downpipes, etc.
Used to insulate up to the roof level behind the gutter, above EWI, when there is no soffit on the property.
Preparation:
Temporarily remove existing guttering will have to be removed temporarily to allow insulated flashing to be installed,
If however the guttering is in poor condition we would recommend that the replace guttering is replaced to protect the long-term performance of the insulation upgrade.
Thermal Conductivity Insulation:
Vapour Control Layer Foil wrapped Insulation
Insulation Material: Aerogel
Product Reference: Spaceloft Aerogel
Manufacturer: Aspen Aerogels Inc. USA
Thickness: 10 mm
Bonded to back of metal profiles
Profiles: pressed/extruded interlocking profiles
Metal: Aluminium
Finish: Powder coated to work section Z31
Colour: [______], RAL/BS 4800: [________].
Gloss level: [________] %
Product Reference: Thermo-Pro® Fascia
European Patent No. 2703574
Fasteners: assuming brickwork and lime mortar
Material: [________]
Type: [________]
Size: [________]
Spacing: [________]
Completion:
Refix reclaimed/Fix new rainwater gutter and downpipes
Coordinate with rainwater gutter boxes cutouts to M21/276E and fascias.

276E THERMAL BREAK FLASHING PROFILES BEHIND RW DOWNPIPE SWAN NECK CUTTING INTO EWI

Drawing Reference(s): [________]
Constructive Details Ltd.:
CD0058 Thermo-Pro Soil Pipe
CD0109 Thermo-Pro Fascia
Reference Documents:
Constructive Details Ltd.:
A handbook of thermal bridging details incorporating Instaclad insulated thermal profile solutions
Book 6 — Thermo-Pro Soil Pipe solution for insulating on retrofit External Wall Insulation
Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around eaves abutments and realigned services.
Applications:
Abutments with removable reclaimable and realigned rainwater downpipes, etc.
Allows the thicker EWI insulation to be installed as high up the wall as possible by allowing the slim swan-neck piece of the gutter to cut into the EWI system.
The gutter box can also be used at the bottom of the wall to allow the downpipe to drain into the original gully or drain and avoid or prevent overspill during heavy rain.
Preparation: remove and reclaim existing rainwater downpipes for reuse
Thermal Conductivity Insulation:
Vapour Control Layer Foil wrapped Insulation
Insulation Material: Aerogel
Product Reference: Spaceloft Aerogel
Manufacturer: Aspen Aerogels Inc. USA
Thickness: 10 mm
Insulation VCL Bonded to back of metal profiles
Profiles: pressed/extruded interlocking profiles
Metal: Aluminium
Finish: Powder coated to work section Z31
Colour: [______], RAL/BS 4800: [________].
Gloss level: [________] %
Product Reference: Thermo-Pro® Rainwater Gutter Box
Model Reference: [TPGT/TPGB]
Application: [Top/Bottom]
Size: one size
European Patent No. 2703574
Fasteners: assuming brickwork and lime mortar
Material: [________]
Type: [________]
Size: [________]
Spacing: [________]
Completion:
[Modify and refix reclaimed or fix new] rainwater downpipes, realigning to fix to face of EWI
Coordinate with rainwater gutter outlets, fascia cutout boxes and base cutouts boxes

280E THERMAL BREAK LEAD FLASHING BETWEEN PITCHED ROOF AND WALLS WITH EWI

Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around roof abutments with walls.
Applications: Abutments between roofs and walls above,
Preparation: remove and reclaim existing flashing to recycle
Sequence: Existing: pitched roof and wall; Next: Flashing Profile; Next: base profile to EWI, Last: EWI.
Thermal Conductivity Insulation:
Vapour Control Layer Foil wrapped Insulation
Insulation Material: Aerogel
Product Reference: Spaceloft Aerogel
Manufacturer: Aspen Aerogels Inc. USA
Thickness: 10 mm
Lead Gauge: __
Lead weight: _
Finish: Patination Oil
Product Reference: Thermo-Pro® Thermo-Flash Lead
Model Reference: TF1,
Size: 300 x 370 mm
European Patent No. 2703574
Fasteners: assuming brickwork and lime mortar
Material: [________]
Type: [________]
Size: [________]
Spacing: [________]
Completion: EWI.

281E THERMAL BREAK FLASHING PROFILES BETWEEN PITCHED ROOF AND WALLS WITH EWI

Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around roof abutments with walls.
Applications: Abutments between roofs and walls above,
Preparation: remove and reclaim existing flashing to recycle
Sequence: Existing: pitched roof and wall; Next: Flashing Profile; Next: base profile to EWI, Last: EWI.
Thermal Conductivity Insulation:
Vapour Control Layer Foil wrapped Insulation
Insulation Material: Aerogel
Product Reference: Spaceloft Aerogel
Manufacturer: Aspen Aerogels Inc. USA
Thickness: 10 mm
Insulation VCL Bonded to back of metal profiles
Profiles: pressed/extruded profiles
Metal: Aluminium
Finish: Pre-coated
Colour: [______], RAL/BS 4800: [________].
Gloss level: [________] %
Product Reference: Thermo-Pro® Thermo-Flash Aluminium
Model Reference: TPF1,
Size: 11 x 100 x ___ x (cut from) 2500 mm
Finish: Powder coated to work section Z31
Colour: [______], RAL/BS 4800: [________].
Gloss level: [________] %
Product Reference: Thermo-Pro® Thermo-Flash Aluminium
Model Reference: TPF2,
Size: 11 x 100 x ___ x (cut from) 2500 mm
European Patent No. 2703574
Fasteners: assuming brickwork and lime mortar
Material: [________]
Type: [________]
Size: [________]
Spacing: [________]
Completion: EWI.

Thermal Break Plinth Between Pavement And Wall With EWI
285E THERMAL BREAK PLINTH BETWEEN PAVEMENT AND WALL WITH EWI

Drawing Reference(s): [________]
Constructive Details Ltd.:
CD0108 Thermo-Trac
Reference Documents:
Constructive Details Ltd.:
A handbook of thermal bridging details incorporating Instaclad insulated thermal profile solutions
Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around paving abutments with walls.
Applications: Abutments between paving or soil and walls above,
Sequence: Existing: paving and wall; Next: plinth/base profile to EWI, Last: EWI.
Thermal Conductivity Insulation:
Insulation Material: Rigid Extruded Polystyrene (XPS)
Product Reference: ___
Manufacturer: _
Thickness: __ mm
Insulation bonded to back of profile
Profile: extruded
Product Reference: Thermo-Pro® Thermo-Trac
Model Reference: [TT1/TT2]
Size: [60/80] x 150 x (Cut from) 2500 mm
To suit: [90mm EPS/110mm Mineral Wool]
Corner Profiles: external corners: extruded, mitred and bonded
Product Reference: Thermo-Pro® Thermo-Trac External Corner
Model Reference: [TTEC1/TTEC2]
Size: [60/80] x 150 x 500 x 500 mm
To suit: [90mm EPS/110mm Mineral Wool]
Corner Profiles: extended external corners: extruded, mitred and bonded
Product Reference: Thermo-Pro® Thermo-Trac External Corner
Model Reference: [TTEC3/TTEC4]
Size: [60/80] x 300 x 500 x 500 mm
To suit: [90mm EPS/110mm Mineral Wool]
Corner Profiles: Internal corners: extruded, mitred and bonded
Product Reference: Thermo-Pro® Thermo-Trac External Corner
Model Reference: [TTIC1/TTIC2]
Size: [60/80] x 150 x 500 x 500 mm
To suit: [90mm EPS/110mm Mineral Wool]
Corner Profiles: Extended Internal corners: extruded, mitred and bonded
Product Reference: Thermo-Pro® Thermo-Trac External Corner
Model Reference: [TTIC3/TTIC4]
Size: [60/80] x 300 x 500 x 500 mm
To suit: [90mm EPS/110mm Mineral Wool]
Joint Pieces: extruded
Product Reference: Thermo-Pro® Thermo-Trac Joint Pieces
Model Reference: TJ1
Size: 130 x 150 x (Cut from) 2500 mm
To suit: [90mm EPS/110mm Mineral Wool]
Material: Plastic: _______
Colour: [______], RAL/BS 4800: [________].
Gloss level: [________] %
Damp Proof Membrane Course (DPMC):
Material: ______
Installed on top surface of insulation and profile, to receive EWI.
Fastening: Bonded and overlapped and bonded in runs and at corners
Product Reference: Thermo-Pro® Thermo-Trac Plastic
UK Patent Pending: GB 1413183.3
European Patent No. 2703574
Fasteners: assuming brickwork and lime mortar
Material: [________]
Type: [________]
Size: [________]
Spacing: [________]
Completion: EWI.

286E THERMAL BREAK PLINTH BETWEEN PAVEMENT, WALL AND EWI ABOVE:

Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around paving abutments with walls.
Applications: Abutments between paving or soil and walls above,
Sequence: Existing: paving and wall; Next: plinth/base profile to EWI, Last: EWI.
Thermal Conductivity Insulation:
Vapour Control Layer Foil wrapped Insulation
Insulation Material: Aerogel
Product Reference: Spaceloft Aerogel
Manufacturer: _
Thickness: 10 mm
Insulation VCL Bonded to back of metal profiles
Bonded to back of metal profiles
Profiles: pressed/extruded profiles
Metal: Aluminium
Finish: Powder coated to work section Z31
Colour: [______], RAL/BS 4800: [________].
Gloss level: [________] %
Damp Proof Membrane Course (DPMC):
Material: ______
Installed on top surface of insulation and profile, to receive EWI.
Fastening: Bonded and overlapped and bonded in runs and at corners
Product Reference: Thermo-Pro® Thermo-Trac Dynamic
Size:
European Patent No. 2703574
Fasteners: assuming brickwork and lime mortar
Material: [________]
Type: [________]
Size: [________]
Spacing: [________]
Completion: EWI.

390E INSTALL THERMAL BREAK TO WINDOW/DOOR OPENING JAMBS WITHIN EWI

See M21/260E.
Installation: Apply insulation across opening jamb, against both masonry and fixed window/door frame, with angle bead outwards from opening jamb in contact with outer-face of fixed frame of window/door, to receive render system.
External Wall Insulation (EWI) to outer face of brickwork and overlapping full thickness of jamb bead Insulation
External Render:
Overall thickness: 7 mm
Base coat: Applied to: outer face of EWI, Jamb face of EWI and exposed face of Aerogel to abut fixed window/door frame outer face.
Apply reinforcement mesh to basecoat and corner reinforcement.
Apply internal corner stop bead to mesh at junction with fixed window/door frame
Apply render top-coat to mesh and window/door stop bead.

Other installations clauses to add

Revision Notes

Based on text extracted from Thermo-Pro® THERMALLY INSULATED PROFILES FOR EWI PRODUCT GUIDE
No print reference and not dated.
Thermo-Pro Brochure.pdf 1.5 MB dated 7 Dec 2015 14.08 (when received?)
See version of that text with GBE editing below.
Additional information from the following
Ansell+Bailey Welcome to Enviroform Solutions
File: AnsellandBaileyPresentation.pptx 17mb dated 7 Dec 2015 14.09 (when received?)
Based on text extracted from Constructive Details Ltd.:
A handbook of thermal bridging details incorporating Instaclad insulated themal profile solutions
Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
Issued April 2015
File: CDL Bead Soffit & Trac.pdf 1.5 MB dated 7 Dec 2015 17:23 (when received?)
Book 6 — Thermo-Pro Soil Pipe solution for insulating on retrofit External Wall Insulation
Issued 17 Nov 2014
File: CDL Soil Pipe.pdf 0.588 MB dated 7 Dec 2015 17:24 (when received?)
Issued to LB for review: 05/01/16 15:21