Skip to main content
search
0

Thermo-Pro Soil Pipe G#8721

By 30 December 2015August 16th, 2016Accessories, Encyclopaedia, Products, Products

GBE > Encyclopaedia > Product > Accessory > G#8721

Thermo-Pro® Soil Pipe

Thermal Break Profiles Behind Soil Pipe Within EWI


GBE Blog > News

  • 06/01/16: GBE Classify aded to 5 Thermo-Pro Accessories pages
  • 06/01/16: GBE Blog > News and Slider added to header
  • 06/01/16: Draft clauses posted in 5 Thermo-Pro Accessories pages
  • 05/01/16: GBE Robust Specification 1st issue for comment,
  • 30/12/15: 5 Thermo-Pro Accessories pages created
  • 18/12/15: GBE Tabbed Accessory Page Template developed with 5 Thermo-Pro Accessories
  • Click on scrolling images to get static, larger, crisper, whole images
  • Click on Tab 6 Manufacturer’s Downloads to open documents

Thermo-Pro® Soil Pipe

Thermal Break Profiles Behind Soil Pipe Within EWI

Tabs with added * indicates it contains Accessory specific information


    • Literature
    • Application
    • Accessory
    • Installation
    • Complete

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015

    Thermo-Pro® Soil Pipe


    Draft Statement

    INTRODUCTION

    Cold Thermal Bridging in External Wall Insulation (EWI)

    Enviroform Solutions Ltd. have developed a number of unique products using Aerogel thermal conductivity insulation combined with various materials, to tackle the issue of cold thermal bridging and weathering at key junctions when installing External Wall Insulation.

    The Key Junctions in question addressed are:

    • 1 Windows & Door: Reveals & Sills
    • 2 Soil Pipes & Gate Posts / Fences
    • 3 Eaves & Gutter: where little or no overhanging soffit exists
    • 4 Lead Flashing Details: Bay windows to walls – Single storey beside two storey; EWI above pitched roof
    • 5 Below DPMC Level: above ground level

    Failure to identify and adequately deal with these cold thermal bridging elements can lead to

    • A Increased heat loss from a dwelling compared with what was assumed determined during energy modelling.
    • The Risk of surface condensation or mould from lowered internal Surface temperature at or near the Thermal Bridge Junction.
    • C Risk of mould growth from spores in surface condensation at or near the Thermal Bridge Junction.

    By introducing the Thermo-Pro® Soil Pipe insulated profile the linear thermal transmittance is reduced by over 70% and the internal surface temperature is increased by 2.2oC significantly reducing the risk of surface condensation reducing the risk of mould and creating an unhealthy indoor environment.


    GBE Features & Benefits Schedule

    Thermo-Pro Features: Thermo-Pro Benefits:
    Purpose made solutions Made for retrofit EWI (not designed for new build EWI)
    Solves the problem of existing external attachments No need to ignore them or stop insulation short any more
    Comprehensive set of solutions Enables a complete competent EWIS
    Readymade set of complimentary parts Faster, simpler installations
    Thermo-Pro Profiles can be fitted by details specialist ahead of the EWI main insulation works Simplifies and speeds up the job of the primary EWIS specialist sub-contractor.
    Readymade parts fit and accommodate EWI Compatible with BBA Certified EWI Systems on market
    Lightweight and simple installation Thermo-Pro Profiles can be fitted without scaffolding.
    ??? Reduced disruption to access. What does that mean?
    Robust profiles Reduce risk of damage to EWI insulation.
    Superior Weatherproofed solution Superior and simple compared to made-up on site solutions
    Pre-finished solution Painting not dictated by weather conditions on site
    Lead, plastic or powder coated aluminium Long life durable materials and finishes
    Profiles have built-in thermal break insulation No thermal breaks bridges in EWI.
    Increased Internal Surface Temperature Reduces risk of internal surface condensation
    Warm and dry internal surfaces Avoids risk of damp activating spores generating mould
    Mould-free surfaces Avoids risk of asthma and other respiratory illnesses
    Mould-free surfaces Keeps accommodation fit for purpose and occupied

    GBE Accessories

    • Thermo-Pro Thermally insulated profiles for EWI (External wall insulation)
      • Thermo-Bead
        • (Window/Door Reveal Lining for EWI)
      • Thermo-Pro Soil Pipe (this page)
        • (behind vertical and sloping pipes & other abutments in EWI)
      • Thermo-Pro Fascia 
        • (EWI abutments at eaves with little or no overhang)
      • 4 Thermo-Pro Finlock 
        • (Precast concrete gutter Fascia
      • 5 Thermo-Pro Eaves/Gutter 
        • (abutments for EWI)
      • 6 Thermo-Flash (Gutter Fascia)
      • Thermo-Flash
        • (Lead Flashing for EWI to pitched roof)
      • Thermo-Trac
        • (Below DPC EWI skirting with RWP cutout)
      • 9 Thermo-Trac Dynamic
      • 10 Thermo-Pro Column Cladding Insulation
    • External Floor/Walkway and roof terrace/balcony insulation systems
      • Underside:
        •  Floor Soffit Cable trunking Insulation
          • Thermo-Pro Thermally insulated profiles for IWI
    • Thermo-Pro Thermally insulated profiles/Accessories for IWI (Internal Wall Insulated lining)
      • 8 Thermo-Soc
        • (Thermal break for electrical socket in IWI)
      • 9 Magna-Reveal (Jamb lining for IWI)
      • 10 DIY Thermal Reveal/Return Kit
      • 11 Thermo-Joist
    • Solid Wall Masonry Accessories
      1. Sil-T Vapour permeable biocide sealer for masonry
      2. SIL-T20 Vapour permeable Impregnating Adhesive

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 6th January 2016

    Thermo-Pro® Soli Pipe


    GBE Incubator

    Draft Statement

    INTRODUCTION

    Cold Thermal Bridging in External Wall Insulation (EWI)

    Enviroform Solutions Ltd. have developed a number of unique products using Aerogel thermal conductivity insulation combined with various materials, to tackle the issue of cold thermal bridging and weathering at key junctions when installing External Wall Insulation.

    The Key Junctions in question addressed are:

    • 1 Windows & Door: Reveals & Sills
    • 2 Soil Pipes & Gate Posts / Fences
    • 3 Eaves & Gutter: where little or no overhanging soffit exists
    • 4 Lead Flashing Details: Bay windows to walls – Single storey beside two storey; EWI above pitched roof
    • 5 Below DPMC Level: above ground level

    Failure to identify and adequately deal with these cold thermal bridging elements can lead to

    • A Increased heat loss from a dwelling compared with what was assumed determined during energy modelling.
    • The Risk of surface condensation or mould from lowered internal Surface temperature at or near the Thermal Bridge Junction.
    • C Risk of mould growth from spores in surface condensation at or near the Thermal Bridge Junction.

    By introducing the Thermo-Pro® Soil Pipe insulated profile the linear thermal transmittance is reduced by over 70% and the internal surface temperature is increased by 2.2oC significantly reducing the risk of surface condensation reducing the risk of mould and creating an unhealthy indoor environment.


    GBE Features & Benefits Schedule

    Thermo-Pro Features: Thermo-Pro Benefits:
    Purpose made solutions Made for retrofit EWI (not designed for new build EWI)
    Solves the problem of existing external attachments No need to ignore them or stop insulation short any more
    Comprehensive set of solutions Enables a complete competent EWIS
    Readymade set of complimentary parts Faster, simpler installations
    Thermo-Pro Profiles can be fitted by details specialist ahead of the EWI main insulation works Simplifies and speeds up the job of the primary EWIS specialist sub-contractor.
    Readymade parts fit and accommodate EWI Compatible with BBA Certified EWI Systems on market
    Lightweight and simple installation Thermo-Pro Profiles can be fitted without scaffolding.
    ??? Reduced disruption to access. What does that mean?
    Robust profiles Reduce risk of damage to EWI insulation.
    Superior Weatherproofed solution Superior and simple compared to made-up on site solutions
    Pre-finished solution Painting not dictated by weather conditions on site
    Lead, plastic or powder coated aluminium Long life durable materials and finishes
    Profiles have built-in thermal break insulation No thermal breaks bridges in EWI.
    Increased Internal Surface Temperature Reduces risk of internal surface condensation
    Warm and dry internal surfaces Avoids risk of damp activating spores generating mould
    Mould-free surfaces Avoids risk of asthma and other respiratory illnesses
    Mould-free surfaces Keeps accommodation fit for purpose and occupied

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 6th January 2016

    GBE Collaborate Services

    • G#515 N#533 GBE PASS
    • G#747 N#769 GBE PASS Navigation

    GBE Jargon Buster


    Pending

    Document


     

    • PASS Schedule
    • Product
    • Accessory
    • System
    • Screening
    • %%%Pending

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Collaborate Services

    GBE Jargon Buster


    Pending

    Document


     

    • Healthy
    • Environmental
    • Resourceful
    • Appropriate
    • Competent
    • Effective
    • Yardstick

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    Thermo-Pro® Soil Pipe

    GBE Library

    Enviroform Solutions Ltd.

    External Wall Insulation (EWI) Accessories


    Thermo-Pro Brochure
    EnviroformThermoProGuide


    CDL Soil Pipe

    ConstructiveDetails6Enviroform

     

    GBE LCA & EPD

    Sub-system Component

    Spaceloft EPD

     

    SpaceLoftAerogelEPD


    • Brochure (See Manufacturer page)
    • Promotional Literature
    • Technical Literature
    • Specification
    • Method Statement
    • Schedule
    • Colour Swatch
    • CPD Seminar
    • CAD Files
    • BBA Certificate
    • ETA Certificate
    • CE Mark Certificate
    • Green Label
    • Health Label

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015

    GBE Collaborate Services


    Pending

    Document


     

    %%%Pending


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Collaborate Services

    • G#452 N#458 GBE BIM

    Pending

    Document


     


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Collaborate Services

    • GBE BIM Accessory Data Sheet

    Pending

    Document


     

    Selected from CIBSE BIM Product Data Sheets or developed to suit

    PDT CableLadderSystem


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    5th December 2015 – 28th December 2015

    GBE Collaborate Services

    • GBE BIM COBie Data Sheet

    Pending

    Document


     

    • COBie Excel Spreadsheet
    • GBE Excel Short Spreadsheet

    CobieTable

    • Short code URL
    • GBE Repository for LCA data for Environmental Cell
    • GBE 301 Redirect file to maintain links

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    Thermo-Pro® Soil Pipe


    Draft Specification clauses

    M21     INSULATION WITH RENDERED FINISH (EXTERNAL WALL INSULATION EWI)
    To be read with the Preliminaries/General conditions[ A10-A55 and A90]

     

    270E    THERMAL BREAK PROFILES BEHIND SOIL PIPE WITHIN EWI

    • Drawing Reference(s): [________]
    • Constructive Details Ltd.:
    • CD0058 Thermo-Pro Soil Pipe
    • CD0109 Thermo-Pro Fascia
    • Reference Documents:
    •             Constructive Details Ltd.:
    •             A handbook of thermal bridging details incorporating Instaclad insulated thermal profile solutions
    • Book 6 — Thermo-Pro Soil Pipe solution for insulating on retrofit External Wall Insulation
    • Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
    • Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around abutments.
    • Applications: Abutments with not-relocatable [gate posts, fences, soil pipes, etc.]
    • Sequence: Existing: Soil pipe, Profiles next, EWI last.
    • Thermal Conductivity Insulation:
    • Vapour Control Layer Foil wrapped Insulation
    • Insulation Material: Aerogel
    • Product Reference: Spaceloft Aerogel
    • Manufacturer: Aspen Aerogels Inc. USA
    • Thickness: 10 mm
    • Insulation VCL Bonded to back of metal profiles
    • Profiles: pressed/extruded interlocking profiles
    • Metal: Aluminium
    • Finish: Powder coated to work section Z31
    • Colour: [______], RAL/BS 4800: [________].
    • Gloss level: [________] %
    • Product Reference: Thermo-Pro® Soil Pipe
    • Model Reference: TPSP1 & TPSP2,
    • Profile: Z side profile & Z Insulated Profile
    • European Patent No. 2703574
    • Fasteners: assuming brickwork and lime mortar
    • Material: [________]
    • Type: [________]
    • Size: [________]
    • Spacing: [________]

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Collaborate Services

    • GBE Application Data Sheet
    • (Based on CAPEM Product Data Collection Sheet)

    Pending

    Document


    • CAWS/NBS Building Work section: [____]
    • NBS/NGS clause number:  [____]
    • Uniclass/NBS Create Work section: [________]
    • NBS Create/NGS clause number: [________]
    • CLAUSE:
    • %%%pending

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Products

    See Tab 2 About Acccessory & 14 Systems


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015

    GBE Sub-systems

    • IWI internal wall insulation by others
      • Thermo-Soc Accessory by Enviroform Solutions Ltd.
    • IWI internal wall insulation by Enviroform Solutions Ltd.
      • E-line Superslim
      • E-Line Slim
      • E-line Natural
      • E-Line Natural-Hybrid
    • EWI External Wall Insulation System by others
      • Accessories by Enviroform Solutions Ltd. 
    • EWI External Wall Insulation System by Enviroform Solutions Ltd.
      • External Wall & Walkway/Balcony/Roof Parapet Sides:
        • Renderline Superslim
    • Square hollow steel columns by others
      • Insulating cladding by Enviroform Solutions Ltd.
    • Ultratherm Aerogel Flooring for retrofit
      • E-Therm Slim Floor
        • (Insulated Dry Floor System)
    • External Floor/Walkway and roof terrace/balcony insulation systems
      • Topside:
        • Instaline Superslim Balcony Insulation Solution
        • CTF (Cut to Fall) Superslim Balcony/Terrace Insulation Solution
        • Cut to fall Balcony Insulation
      • Parapet Side:
        • Renderline Superslim
      • Underside:
        • E-Line (all 4 systems?)
      • Underside Accessories:
        • Floor Soffit Cable/Pipe tray Insulation
    • Pitched Roof Insulation
      • Within Batten Zone

    • Products
    • Accessories
    • Elemental Assemblies
    • CAWS/NBS Building Work section: [____]
    • NBS/NGS clause number:  [____]
    • Uniclass/NBS Create Work section: [________]
    • NBS Create/NGS clause number: [________]
    • SYSTEM SPECIFICATION CLAUSE TITLE
    • Reference Drawing(s): [_______] (left blank for project editor)
    • Location: [_______] (left blank for project editor)
    • System Assembly:
    • Product(s): to [____/____]
    • Accessories: to [____/____]
    • Elemental Assembly: [________]
    • Legend Reference Number: [________]
    • Substrate: [_______] (left blank for project editor)
    • Preparation: [_______] (left blank for project editor)
    • Application: [________]
    • Specification
    • Schedule
    • Method Statement:

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015

    GBE Collaborate Services

    GBE Jargon Buster


    Pending

    Document


     

    • CAWS/NBS Building Work section: [____]
    • NBS/NGS clause number:  [____]
    • Uniclass/NBS Create Work section: [________]
    • NBS Create/NGS clause number: [________]
    • ELEMENTAL ASSEMBLY CLAUSE TITLE:
    • Legend Element Reference: [________]
    • GBE BEACON: [________]
    • Reference Drawing(s): [_______] (left blank for project editor)
    • Location: [_______] (left blank for project editor)
    • Schedules: [________]
    • Elemental Performances: to [________]
    • Prior Element: [_______] (left blank for project editor)
    • Prior trade sign off: [________]
    • Substrate: [_______] (left blank for project editor)
    • Preparation: [_______] (left blank for project editor)
    • Components: (bottom to top; outer, core to inner)
    • Sub Assembly System: Below: [________] to [____/____]
    • Core Assembly System: Horizontal: [________] to [____/____]
    • Sub Assembly System: Above: [________] to [____/____]
    • Sub Assembly: Outer: [________] to [____/____]
    • Core Assembly System: Vertical: [________] to [____/____]
    • Core Assembly System: Pitched: [________] to [____/____]
    • Sub Assembly: Inner: [________] to [____/____]
    • Testing: [________]
    • Following trade sign off: [________]
    • Protection: [________]
    • Protection: maintenance/checking: [________]
    • Protection Removal: [________].
    • Cleaning: [__________].
    • Other requirements: [________].

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    Thermo-Pro® Soil Pipe


    Insulated Thermal Break Edge Profiles for EWI

    Draft Specification clauses

    M21     INSULATION WITH RENDERED FINISH (EXTERNAL WALL INSULATION EWI)
    To be read with the Preliminaries/General conditions[ A10-A55 and A90]

    210E    EXTERNAL WALL INSULATION SYSTEM (EWIS)

    • Drawing Reference(s): [________]
    • Performance:
      • U value: [________] W/m2.K
      • No thermal bridges at abutments, openings, services.
    • Structural background/Substrate: [Masonry/Brickwork]
    • Preparation: [
    • Remove and reclaim to refit rainwater gutters and down pipes
    • Remove and reclaim to recycle lead flashings]
    • Pretreatment: Fungicidal wash if recommended by system manufacturer.
    • Insulated thermal break edge profiles to M21/260E
    • EWIS:
    • Manufacturer: [________]
    • Product Reference: [________]
    • BBA Agrément Certificate No.: [____/____]
    • Insulation material: [________]
    • Thickness: [________] mm.
    • Density: [________] kg/m³.
    • Minimum compressive strength: [________] kN/m².
    • Method of fixing: [________]
    • Render Base coat: [________]
    • Render carrier/Reinforcement mesh: [________]
    • Method of fixing: [________]
    • Corner reinforcement beads: [________]
    • Abutment stop beads: [________]
    • Render: [________]
    • Decorative finish: [________]

    260E    INSULATED THERMAL BREAK EDGE PROFILES FOR EWI

    • Drawing Reference(s): [________]
    • Constructive Details Ltd.:
      • CD0058 Thermo-Pro Soil Pipe
      • CD0107 Thermo-Bead
      • CD0108 Thermo-Trac
      • CD0109 Thermo-Pro Fascia
    • Reference Documents:
    •             Constructive Details Ltd.:
      • A handbook of thermal bridging details incorporating Instaclad insulated thermal profile solutions
      • Book 6 — Thermo-Pro Soil Pipe solution for insulating on retrofit External Wall Insulation
      • Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
    • External wall insulation system: See M21/210E
    • System Reference: Thermo-Pro®
    • Accessory References: [
      • 1          THERMO-BEAD See M21/265E
      • 2          THERMO-PRO SOIL PIPE See M21/270E
      • 3          THERMO-PRO FASCIA See M21/275E
      • 4a        THERMO-FLASH LEAD See M21/280E
      • 4b        THERMO-FLASH ALUMINIUM See M21/281E
      • 5a        THERMO-TRAC See M21/285E
      • 5b        THERMO-TRAC DYNAMIC See M21/286E
      • 6          THERMO-PRO GUTTER BOX M21/276E]
    • Manufacturer: Enviroform Solutions Ltd. Unit 16, Milltown Industrial Estate, Upper Dromore Road, Warrenpoint, Co. Down, BT34 3PN, Ireland.
    • T          028 4177 3314                        M         07730 766038
    • E          liam@enviroformsolutions.com           W         http://www.enviroformsolutions.com
    • Contact: Liam Brown, Managing Director
    • Supplier: Enviroform Solutions Ltd.
    • Installer: [Main Contractor/EWIS Contractor/Sub-contractor/Trade Contractor]
    • Checking and verification of installation: Use the Guidance Checklist in the Constructive Details handbooks [6 & 8]
    • Provide 2 copies of the completed checklist, signed by the installer’s Director, to the CA upon completion.

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 6th January 2016

    GBE Collaborate Services

    • GBE GBS Robust Workmanship Specification

    Pending

    Document


     

    • ISO Code of Practice
    • EN EuroCode
    • BS Code of Practice
    • BS 8000 Workmanship on Building Sites
    • Industry/Sector Guidance
    • Manufacturers Recommendations & Requirements
    • Compatible/Complimentary Adjacent Systems
    • Sequence
    • Prior trade sign off
    • Following Trade Sign off
    • Accredited /Approved Installers
    • DIY or BIY Suitability
    • Sample Panels
    • Control Samples
    • Specification Clauses
    • CAWS/NBS Building Work section: [____]
    • NBS/NGS clause number:  [____]
    • Uniclass/NBS Create Work section: [________]
    • NBS Create/NGS clause number: [________]
    • WORKMANSHIP CLAUSE TITLE:
    • Reference Drawing(s): [_______] (left blank for project editor)
    • Location: [_______] (left blank for project editor)
    • Prior Trade: [_______] (left blank for project editor)
    • Substrate: [_______] (left blank for project editor)
    • Preparation: [_______] (left blank for project editor)
    • Specification: [________]
    • Schedule: [________]
    • Finish: [________] to work section [____]
    • Colour: [________] RAL: [________]
    • Gloss level:
    • Method Statement:
    • Waste clause: See [____/____]

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Collaborate Services

    • GBE GBS Waste Specification

    • Packaging and Protection requirements
    • Recycling Opportunities
    • Reuse Opportunities
    • European Waste Catalogue reference
    • Waste Category
    • Waste Recycling and Reuse Appendix

    Pending

    Document


     

    • CAWS/NBS Building Work section: [____]
    • NBS/NGS clause number:  [____]
    • Uniclass/NBS Create Work section: [________]
    • NBS Create/NGS clause number: [________]
    • WASTE CLAUSE TITLE:
    • %%%pending

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Collaborate Services

    • GBE GBS FMSpec Specification clause

    • CPD Seminar
    • Schedule
    • Method Statement
    • Specification
    • Availability
    • Spares
    • Maintenance
      • Frequency
      • Materials
      • Tools
    • COBie Data

    Document

    Pending


     

    • CAWS/NBS Building Work section: [____]
    • NBS/NGS clause number:  [____]
    • Uniclass/NBS Create Work section: [________]
    • NBS Create/NGS clause number: [________]
    • MAINTENANCE CLAUSE:
    • %%%pending

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Collaborate Services

    • N#1677 GBE End of life

    Pending

    Document


     

    • Pre Alteration Audit
    • Pre Demolition Audit
    • Soft Strip
    • Resale Opportunities
    • Reuse Applications
    • Reuse Accreditation
    • Deconstruction
    • Accessory Passport
    • Demolitions
    • Waste Category
    • European Waste Catalogue reference
    • Recycling Opportunities
    • CAWS/NBS Building Work section: [____]
    • NBS/NGS clause number:  [____]
    • Uniclass/NBS Create Work section: [________]
    • NBS Create/NGS clause number: [________]
    • END OF LIFE CLAUSE:
    • %%%pending

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Collaborate Services

    GBE Jargon Buster


    Pending

    Document


     

    • Accessory Passport
    • Provenance
    • Pre Alteration Audit
    • Pre Demolition Audit
    • Original Building
    • Exposure Condition
    • Orientation
    • State of repair
    • Quantity
    • Properties
    • Evidence of Properties
    • Deconstruction
    • Demolitions
    • Palleting Packaging and Protection
    • Bar Code/QR Codes
    • Information Repositry
    • Resale Opportunities
    • Reuse Applications
    • Reuse Accreditation

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    GBE Jargon Buster

    G#1333 N#1320 GBE Jargon Buster Themes

    • Refurbishment

    Jargon Buster Words and Phrases

    • Refurbishment

    GBE Checklist


    GBE Code


    GBE Q&A


    GBE Defects

    • External Wall Insulation: Insulation with Rendered Finish
    • GreenDeal & ECO failings

    GBE CPD

    Theme


    GBE Lectures


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015


    Pending

    Document


     

    • Manufacturer’s Environmental Self-Declaration to ISO 14021
    • Independent Validation of Manufacturer’s claim to ISO 14021
    • Report
    • Evidence Documents
    • Factory Visits
    • Public Disclosure Document Schedule
    • URL to Repository for Public Disclosure Documents
    • 301 Redirects to maintain links

    %%%Pending


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 28th December 2015

    EPD Environmental Product Declaration

    This EPD is for the Aerogel insulation only

    It was carried out Renuables (UK Consultant and later Sub-Partner of CAPEM LCA & EPD project)

    Spaceloft EPD PDF

    SpaceLoftAerogelEPD

     


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015

    Thermo-Pro® Soil Pipe

    GBE Classify


    CAWS 1987:

    • M21 Insulation with Rendered Finish

    CAWS Elemental 2012:

    • _

    CI/SfB 1976:

    • (21.9) Walls, External Walls
    • (21.9) Accessories
    • (41) Wall Finishes External
    • R Rigid Sheet Work
    • P Thick Coating Work
    • Z Joints
    • h Metals
    • m inorganic fibres
    • n Plastics
    • t fixing and jointing materials

    Uniclass 1997:

    • J M21 Insulation with Rendered Finish

    Uniclass Elemental 2012:

    • _

    Uniclass for BIM 2015:

    • _

    GBE Collaborative Service

    G#1479 N#1440 GBE Classify

     

    RIBACISfBBox RIBAClassification

    N#1441: 17/04/2014: GBE CLASSIFY:
    Service to classify literature developed to Samples Box labelling

    NGSCLASSIFYGeminiNGSCLASSIFYGeminiSamplesBoxLabel

     


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 6th January 2016

    GBE Manufacturer


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015

    GBE Supplier


    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015

    GBE Installers/Applicators

    COMPANY NAME: Many

    • Any EWI Manufacturer Approved Installer/Applicator
    • No specialist needed
    • Suitable for DIY Do It Yourself (bespoke product for DIY)
    • Suitable for BIY Build it Yourself (Self-Build)

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015

    GBE Swatch

    Plastic face:

    • Thermo-Pro Soil Pipe
    • Colour Options: ______

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 30th December 2015

    © GBE NGS ASWS BrianSpecMan aka Brian Murphy
    18th December 2015 – 6th January 2016

    Leave a Reply

    Close Menu