GBE > Encyclopaedia > Product > Accessory > G#8742
Thermo-Trac
Retrofit thermal break insulated skirting below external wall insulation
GBE Blog > News
- 06/01/16: GBE Classify aded to 5 Thermo-Pro Accessories pages
- 06/01/16: GBE Blog > News and Slider added to header
- 06/01/16: Draft clauses posted in 5 Thermo-Pro Accessories pages
- 05/01/16: GBE Robust Specification 1st issue for comment,
- 30/12/15: 5 Thermo-Pro Accessories pages created
- 18/12/15: GBE Tabbed Accessory Page Template developed with 5 Thermo-Pro Accessories
Thermo-Trac
Retrofit thermal break insulated skirting below external wall insulation
Tabs with added * indicates it contains Accessory specific information
- Literature
- Application
- Accessory
- Installation
- Complete
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 30th December 2015
Thermo-Pro® Thermo-Trac
Retrofit thermal break insulated skirting below external wall insulation
GBE Incubator
Draft Statement
INTRODUCTION
Cold Thermal Bridging in External Wall Insulation (EWI)
Enviroform Solutions Ltd. have developed a number of unique products using Aerogel thermal conductivity insulation combined with various materials, to tackle the issue of cold thermal bridging and weathering at key junctions when installing External Wall Insulation.
The Key Junctions in question addressed are:
- 1 Windows & Door: Reveals & Sills
- 2 Soil Pipes & Gate Posts / Fences
- 3 Eaves & Gutter: where little or no overhanging soffit exists
- 4 Lead Flashing Details: Bay windows to walls – Single storey beside two storey; EWI above pitched roof
- 5 Below DPMC Level: above ground level
Failure to identify and adequately deal with these cold thermal bridging elements can lead to
- A Increased heat loss from a dwelling compared with what was assumed determined during energy modelling.
- B The Risk of surface condensation or mould from lowered internal Surface temperature at or near the Thermal Bridge Junction.
- C Risk of mould growth from spores in surface condensation at or near the Thermal Bridge Junction.
By introducing the Thermo-Pro® Soil Pipe insulated profile the linear thermal transmittance is reduced by over 70% and the internal surface temperature is increased by 2.2oC significantly reducing the risk of surface condensation reducing the risk of mould and creating an unhealthy indoor environment.
GBE Features & Benefits Schedule
| Thermo-Pro Features: | Thermo-Pro Benefits: |
| Purpose made solutions | Made for retrofit EWI (not designed for new build EWI) |
| Solves the problem of existing external attachments | No need to ignore them or stop insulation short any more |
| Comprehensive set of solutions | Enables a complete competent EWIS |
| Readymade set of complimentary parts | Faster, simpler installations |
| Thermo-Pro Profiles can be fitted by details specialist ahead of the EWI main insulation works | Simplifies and speeds up the job of the primary EWIS specialist sub-contractor. |
| Readymade parts fit and accommodate EWI | Compatible with BBA Certified EWI Systems on market |
| Lightweight and simple installation | Thermo-Pro Profiles can be fitted without scaffolding. |
| ??? | Reduced disruption to access. What does that mean? |
| Robust profiles | Reduce risk of damage to EWI insulation. |
| Superior Weatherproofed solution | Superior and simple compared to made-up on site solutions |
| Pre-finished solution | Painting not dictated by weather conditions on site |
| Lead, plastic or powder coated aluminium | Long life durable materials and finishes |
| Profiles have built-in thermal break insulation | No thermal breaks bridges in EWI. |
| Increased Internal Surface Temperature | Reduces risk of internal surface condensation |
| Warm and dry internal surfaces | Avoids risk of damp activating spores generating mould |
| Mould-free surfaces | Avoids risk of asthma and other respiratory illnesses |
| Mould-free surfaces | Keeps accommodation fit for purpose and occupied |
5 Thermo-Pro® Thermo-Trac – Thermally Insulated Base Rail & Corners
DESCRIPTION
Thermo-Pro® Thermo-Trac is a prefinished insulated base rail with an integrated damp proof membrane layer used for eliminating cold bridging below the ground level DPCM zone.
Simply bedded into a specially designed water proof mortar, it can be efficiently installed and levelled from in both the vertical and horizontal plains.
The product can be easily cut to allow for sloping or rising plinth details leaving a clean aesthetically pleasing finish.
Key areas of use
- Below ground level DPCM
Key advantages
- Elimination of cold bridging.
- Pre finished aluminium.
- Pre manufactured corners.
- Aesthetically pleasing.
- Easy to install.
- Cost effective.
GBE Accessories
- Thermo-Pro Thermally insulated profiles for EWI (External wall insulation)
- 1 Thermo-Bead
- (Window/Door Reveal Lining for EWI)
- 2 Thermo-Pro Soil Pipe
- (behind vertical and sloping pipes & other abutments in EWI)
- 3 Thermo-Pro Fascia
- (EWI abutments at eaves with little or no overhang)
- 4 Thermo-Pro Finlock
- (Precast concrete gutter Fascia
- 5 Thermo-Pro Eaves/Gutter
- (abutments for EWI)
- 6 Thermo-Flash (Gutter Fascia)
- 7 Thermo-Flash
- (Lead Flashing for EWI to pitched roof)
- 8 Thermo-Trac (this page)
- (Below DPC EWI skirting with RWP cutout)
- 9 Thermo-Trac Dynamic
- 10 Thermo-Pro Column Cladding Insulation
- 1 Thermo-Bead
- External Floor/Walkway and roof terrace/balcony insulation systems
- Underside:
- Floor Soffit Cable trunking Insulation
-
- Thermo-Pro Thermally insulated profiles for IWI
- Underside:
- Thermo-Pro Thermally insulated profiles/Accessories for IWI (Internal Wall Insulated lining)
- 8 Thermo-Soc
- (Thermal break for electrical socket in IWI)
- 9 Magna-Reveal (Jamb lining for IWI)
- 10 DIY Thermal Reveal/Return Kit
- 11 Thermo-Joist
- 8 Thermo-Soc
- Solid Wall Masonry Accessories
- Sil-T Vapour permeable biocide sealer for masonry
- SIL-T20 Vapour permeable Impregnating Adhesive
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 6th January 2016
Thermo-Pro® Thermo-Trac
GBE Incubator
Draft Statement
INTRODUCTION
Cold Thermal Bridging in External Wall Insulation (EWI)
Enviroform Solutions Ltd. have developed a number of unique products using Aerogel thermal conductivity insulation combined with various materials, to tackle the issue of cold thermal bridging and weathering at key junctions when installing External Wall Insulation.
The Key Junctions in question addressed are:
- 1 Windows & Door: Reveals & Sills
- 2 Soil Pipes & Gate Posts / Fences
- 3 Eaves & Gutter: where little or no overhanging soffit exists
- 4 Lead Flashing Details: Bay windows to walls – Single storey beside two storey; EWI above pitched roof
- 5 Below DPMC Level: above ground level
Failure to identify and adequately deal with these cold thermal bridging elements can lead to
- A Increased heat loss from a dwelling compared with what was assumed determined during energy modelling.
- B The Risk of surface condensation or mould from lowered internal Surface temperature at or near the Thermal Bridge Junction.
- C Risk of mould growth from spores in surface condensation at or near the Thermal Bridge Junction.
By introducing the Thermo-Pro® Soil Pipe insulated profile the linear thermal transmittance is reduced by over 70% and the internal surface temperature is increased by 2.2oC significantly reducing the risk of surface condensation reducing the risk of mould and creating an unhealthy indoor environment.
GBE Features & Benefits Schedule
| Thermo-Pro Features: | Thermo-Pro Benefits: |
| Purpose made solutions | Made for retrofit EWI (not designed for new build EWI) |
| Solves the problem of existing external attachments | No need to ignore them or stop insulation short any more |
| Comprehensive set of solutions | Enables a complete competent EWIS |
| Readymade set of complimentary parts | Faster, simpler installations |
| Thermo-Pro Profiles can be fitted by details specialist ahead of the EWI main insulation works | Simplifies and speeds up the job of the primary EWIS specialist sub-contractor. |
| Readymade parts fit and accommodate EWI | Compatible with BBA Certified EWI Systems on market |
| Lightweight and simple installation | Thermo-Pro Profiles can be fitted without scaffolding. |
| ??? | Reduced disruption to access. What does that mean? |
| Robust profiles | Reduce risk of damage to EWI insulation. |
| Superior Weatherproofed solution | Superior and simple compared to made-up on site solutions |
| Pre-finished solution | Painting not dictated by weather conditions on site |
| Lead, plastic or powder coated aluminium | Long life durable materials and finishes |
| Profiles have built-in thermal break insulation | No thermal breaks bridges in EWI. |
| Increased Internal Surface Temperature | Reduces risk of internal surface condensation |
| Warm and dry internal surfaces | Avoids risk of damp activating spores generating mould |
| Mould-free surfaces | Avoids risk of asthma and other respiratory illnesses |
| Mould-free surfaces | Keeps accommodation fit for purpose and occupied |
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 6th January 2016
- G#515 N#533 GBE PASS
- G#747 N#769 GBE PASS Navigation
GBE Jargon Buster
- G#1057 N#1074 GBE PASS Products Accessory System Screening
- PASS Schedule
- Product
- Accessory
- System
- Screening
- %%%Pending
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
GBE Library
Enviroform Solutions Ltd.
External Wall Insulation (EWI) Accessories
GBE LCA & EPD
Sub-system Component
- Brochure (See Manufacturer page)
- Promotional Literature
- Technical Literature
- Specification
- Method Statement
- Schedule
- Colour Swatch
- CPD Seminar
- CAD Files
- BBA Certificate
- ETA Certificate
- CE Mark Certificate
- Green Label
- Health Label
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 30th December 2015
- G#543 N#563 GBE Product Data Sheet
- GBE Accessory Data Sheet
%%%Pending
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
- G#452 N#458 GBE BIM
- Product Object
- Accessory Object
- System Assembly
- Elemental Assembly
- BIM Products Data Sheet (This page tab 9)
- Digital Object Identifiers (DOI)
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
- GBE BIM Accessory Data Sheet
Selected from CIBSE BIM Product Data Sheets or developed to suit
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
5th December 2015 – 28th December 2015
- GBE BIM COBie Data Sheet
- COBie Excel Spreadsheet
- GBE Excel Short Spreadsheet
- Short code URL
- GBE Repository for LCA data for Environmental Cell
- GBE 301 Redirect file to maintain links
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
Thermo-Pro® Thermo-Trac
Retrofit thermal break insulated skirting below external wall insulation
Draft Specification clauses
M21 INSULATION WITH RENDERED FINISH (EXTERNAL WALL INSULATION EWI)
To be read with the Preliminaries/General conditions[ A10-A55 and A90]
285E THERMAL BREAK PLINTH BETWEEN PAVEMENT AND WALL WITH EWI
- Drawing Reference(s): [________]
- Constructive Details Ltd.:
- CD0108 Thermo-Trac
- Reference Documents:
- Constructive Details Ltd.:
- A handbook of thermal bridging details incorporating Instaclad insulated thermal profile solutions
- Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
- Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around paving abutments with walls.
- Applications: Abutments between paving or soil and walls above,
- Sequence: Existing: paving and wall; Next: plinth/base profile to EWI, Last: EWI.
- Thermal Conductivity Insulation:
- Insulation Material: Rigid Extruded Polystyrene (XPS)
- Product Reference: ___
- Manufacturer: _
- Thickness: __ mm
- Insulation bonded to back of profile
- Profile: extruded
- Product Reference: Thermo-Pro® Thermo-Trac
- Model Reference: [TT1/TT2]
- Size: [60/80] x 150 x (Cut from) 2500 mm
- To suit: [90mm EPS/110mm Mineral Wool]
- Corner Profiles: external corners: extruded, mitred and bonded
- Product Reference: Thermo-Pro® Thermo-Trac External Corner
- Model Reference: [TTEC1/TTEC2]
- Size: [60/80] x 150 x 500 x 500 mm
- To suit: [90mm EPS/110mm Mineral Wool]
- Corner Profiles: extended external corners: extruded, mitred and bonded
- Product Reference: Thermo-Pro® Thermo-Trac External Corner
- Model Reference: [TTEC3/TTEC4]
- Size: [60/80] x 300 x 500 x 500 mm
- To suit: [90mm EPS/110mm Mineral Wool]
- Corner Profiles: Internal corners: extruded, mitred and bonded
- Product Reference: Thermo-Pro® Thermo-Trac External Corner
- Model Reference: [TTIC1/TTIC2]
- Size: [60/80] x 150 x 500 x 500 mm
- To suit: [90mm EPS/110mm Mineral Wool]
- Corner Profiles: Extended Internal corners: extruded, mitred and bonded
- Product Reference: Thermo-Pro® Thermo-Trac External Corner
- Model Reference: [TTIC3/TTIC4]
- Size: [60/80] x 300 x 500 x 500 mm
- To suit: [90mm EPS/110mm Mineral Wool]
- Joint Pieces: extruded
- Product Reference: Thermo-Pro® Thermo-Trac Joint Pieces
- Model Reference: TJ1
- Size: 130 x 150 x (Cut from) 2500 mm
- To suit: [90mm EPS/110mm Mineral Wool]
- Material: Plastic: _______
- Colour: [______], RAL/BS 4800: [________].
- Gloss level: [________] %
- Damp Proof Membrane Course (DPMC):
- Material: ______
- Installed on top surface of insulation and profile, to receive EWI.
- Fastening: Bonded and overlapped and bonded in runs and at corners
- Product Reference: Thermo-Pro® Thermo-Trac Plastic
- UK Patent Pending: GB 1413183.3
- European Patent No. 2703574
- Fasteners: assuming brickwork and lime mortar
- Material: [________]
- Type: [________]
- Size: [________]
- Spacing: [________]
- Completion: EWI.
286E THERMAL BREAK PLINTH BETWEEN PAVEMENT, WALL AND EWI ABOVE:
- Purpose: The Thermo-Pro range of profiles has been developed to provide a weather tight and thermal bridging breaking solution for external wall insulation systems around paving abutments with walls.
- Applications: Abutments between paving or soil and walls above,
- Sequence: Existing: paving and wall; Next: plinth/base profile to EWI, Last: EWI.
- Thermal Conductivity Insulation:
- Vapour Control Layer Foil wrapped Insulation
- Insulation Material: Aerogel
- Product Reference: Spaceloft Aerogel
- Manufacturer: _
- Thickness: 10 mm
- Insulation VCL Bonded to back of metal profiles
- Bonded to back of metal profiles
- Profiles: pressed/extruded profiles
- Metal: Aluminium
- Finish: Powder coated to work section Z31
- Colour: [______], RAL/BS 4800: [________].
- Gloss level: [________] %
- Damp Proof Membrane Course (DPMC):
- Material: ______
- Installed on top surface of insulation and profile, to receive EWI.
- Fastening: Bonded and overlapped and bonded in runs and at corners
- Product Reference: Thermo-Pro® Thermo-Trac Dynamic
- Size:
- European Patent No. 2703574
- Fasteners: assuming brickwork and lime mortar
- Material: [________]
- Type: [________]
- Size: [________]
- Spacing: [________]
- Completion: EWI.
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 6th January 2016
- GBE Application Data Sheet
- (Based on CAPEM Product Data Collection Sheet)
- CAWS/NBS Building Work section: [____]
- NBS/NGS clause number: [____]
- Uniclass/NBS Create Work section: [________]
- NBS Create/NGS clause number: [________]
- CLAUSE:
- %%%pending
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
GBE Products
See Tab 2 About Acccessory & Tab 14 Systems
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 30th December 2015
GBE Sub-systems
- IWI internal wall insulation by others
- Thermo-Soc Accessory by Enviroform Solutions Ltd.
- IWI internal wall insulation by Enviroform Solutions Ltd.
- E-line Superslim
- E-Line Slim
- E-line Natural
- E-Line Natural-Hybrid
- EWI External Wall Insulation System by others
- Accessories by Enviroform Solutions Ltd.
- EWI External Wall Insulation System by Enviroform Solutions Ltd.
- External Wall & Walkway/Balcony/Roof Parapet Sides:
- Renderline Superslim
- External Wall & Walkway/Balcony/Roof Parapet Sides:
- Square hollow steel columns by others
- Insulating cladding by Enviroform Solutions Ltd.
- Ultratherm Aerogel Flooring for retrofit
- E-Therm Slim Floor
- (Insulated Dry Floor System)
- E-Therm Slim Floor
- External Floor/Walkway and roof terrace/balcony insulation systems
- Topside:
- Instaline Superslim Balcony Insulation Solution
- CTF (Cut to Fall) Superslim Balcony/Terrace Insulation Solution
- Cut to fall Balcony Insulation
- Parapet Side:
- Renderline Superslim
- Underside:
- E-Line (all 4 systems?)
- Underside Accessories:
- Floor Soffit Cable/Pipe tray Insulation
- Topside:
- Pitched Roof Insulation
- Within Batten Zone
- Products
- Accessories
- Elemental Assemblies
- CAWS/NBS Building Work section: [____]
- NBS/NGS clause number: [____]
- Uniclass/NBS Create Work section: [________]
- NBS Create/NGS clause number: [________]
- SYSTEM SPECIFICATION CLAUSE TITLE
- Reference Drawing(s): [_______] (left blank for project editor)
- Location: [_______] (left blank for project editor)
- System Assembly:
- Product(s): to [____/____]
- Accessories: to [____/____]
- Elemental Assembly: [________]
- Legend Reference Number: [________]
- Substrate: [_______] (left blank for project editor)
- Preparation: [_______] (left blank for project editor)
- Application: [________]
- Specification
- Schedule
- Method Statement:
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 30th December 2015
- G#1226 N#1227 GBE Elemental Assemblies
GBE Jargon Buster
- N#1618: B03 Elemental System Performance
- CAWS/NBS Building Work section: [____]
- NBS/NGS clause number: [____]
- Uniclass/NBS Create Work section: [________]
- NBS Create/NGS clause number: [________]
- ELEMENTAL ASSEMBLY CLAUSE TITLE:
- Legend Element Reference: [________]
- GBE BEACON: [________]
- Reference Drawing(s): [_______] (left blank for project editor)
- Location: [_______] (left blank for project editor)
- Schedules: [________]
- Elemental Performances: to [________]
- Prior Element: [_______] (left blank for project editor)
- Prior trade sign off: [________]
- Substrate: [_______] (left blank for project editor)
- Preparation: [_______] (left blank for project editor)
- Components: (bottom to top; outer, core to inner)
- Sub Assembly System: Below: [________] to [____/____]
- Core Assembly System: Horizontal: [________] to [____/____]
- Sub Assembly System: Above: [________] to [____/____]
- Sub Assembly: Outer: [________] to [____/____]
- Core Assembly System: Vertical: [________] to [____/____]
- Core Assembly System: Pitched: [________] to [____/____]
- Sub Assembly: Inner: [________] to [____/____]
- Testing: [________]
- Following trade sign off: [________]
- Protection: [________]
- Protection: maintenance/checking: [________]
- Protection Removal: [________].
- Cleaning: [__________].
- Other requirements: [________].
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
Thermo-Pro® Thermo-Trac
Insulated Thermal Break Edge Profiles for EWI
Draft Specification clauses
M21 INSULATION WITH RENDERED FINISH (EXTERNAL WALL INSULATION EWI)
To be read with the Preliminaries/General conditions[ A10-A55 and A90]
210E EXTERNAL WALL INSULATION SYSTEM (EWIS)
- Drawing Reference(s): [________]
- Performance:
- U value: [________] W/m2.K
- No thermal bridges at abutments, openings, services.
- Structural background/Substrate: [Masonry/Brickwork]
- Preparation: [
- Remove and reclaim to refit rainwater gutters and down pipes
- Remove and reclaim to recycle lead flashings]
- Pretreatment: Fungicidal wash if recommended by system manufacturer.
- Insulated thermal break edge profiles to M21/260E
- EWIS:
- Manufacturer: [________]
- Product Reference: [________]
- BBA Agrément Certificate No.: [____/____]
- Insulation material: [________]
- Thickness: [________] mm.
- Density: [________] kg/m³.
- Minimum compressive strength: [________] kN/m².
- Method of fixing: [________]
- Render Base coat: [________]
- Render carrier/Reinforcement mesh: [________]
- Method of fixing: [________]
- Corner reinforcement beads: [________]
- Abutment stop beads: [________]
- Render: [________]
- Decorative finish: [________]
260E INSULATED THERMAL BREAK EDGE PROFILES FOR EWI
- Drawing Reference(s): [________]
- Constructive Details Ltd.:
- CD0058 Thermo-Pro Soil Pipe
- CD0107 Thermo-Bead
- CD0108 Thermo-Trac
- CD0109 Thermo-Pro Fascia
- Reference Documents:
- Constructive Details Ltd.:
- A handbook of thermal bridging details incorporating Instaclad insulated thermal profile solutions
- Book 6 — Thermo-Pro Soil Pipe solution for insulating on retrofit External Wall Insulation
- Book 8 — Cold bridging solutions for insulating on retrofit External Wall Insulation
- External wall insulation system: See M21/210E
- System Reference: Thermo-Pro®
- Accessory References: [
- 1 THERMO-BEAD See M21/265E
- 2 THERMO-PRO SOIL PIPE See M21/270E
- 3 THERMO-PRO FASCIA See M21/275E
- 4a THERMO-FLASH LEAD See M21/280E
- 4b THERMO-FLASH ALUMINIUM See M21/281E
- 5a THERMO-TRAC See M21/285E
- 5b THERMO-TRAC DYNAMIC See M21/286E
- 6 THERMO-PRO GUTTER BOX M21/276E]
- Manufacturer: Enviroform Solutions Ltd. Unit 16, Milltown Industrial Estate, Upper Dromore Road, Warrenpoint, Co. Down, BT34 3PN, Ireland.
- T 028 4177 3314 M 07730 766038
- E liam@enviroformsolutions.com W http://www.enviroformsolutions.com
- Contact: Liam Brown, Managing Director
- Supplier: Enviroform Solutions Ltd.
- Installer: [Main Contractor/EWIS Contractor/Sub-contractor/Trade Contractor]
- Checking and verification of installation: Use the Guidance Checklist in the Constructive Details handbooks [6 & 8]
- Provide 2 copies of the completed checklist, signed by the installer’s Director, to the CA upon completion.
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 6th January 2016
- GBE GBS Robust Workmanship Specification
- ISO Code of Practice
- EN EuroCode
- BS Code of Practice
- BS 8000 Workmanship on Building Sites
- Industry/Sector Guidance
- Manufacturers Recommendations & Requirements
- Compatible/Complimentary Adjacent Systems
- Sequence
- Prior trade sign off
- Following Trade Sign off
- Accredited /Approved Installers
- DIY or BIY Suitability
- Sample Panels
- Control Samples
- Specification Clauses
- CAWS/NBS Building Work section: [____]
- NBS/NGS clause number: [____]
- Uniclass/NBS Create Work section: [________]
- NBS Create/NGS clause number: [________]
- WORKMANSHIP CLAUSE TITLE:
- Reference Drawing(s): [_______] (left blank for project editor)
- Location: [_______] (left blank for project editor)
- Prior Trade: [_______] (left blank for project editor)
- Substrate: [_______] (left blank for project editor)
- Preparation: [_______] (left blank for project editor)
- Specification: [________]
- Schedule: [________]
- Finish: [________] to work section [____]
- Colour: [________] RAL: [________]
- Gloss level:
- Method Statement:
- Waste clause: See [____/____]
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
- GBE GBS Waste Specification
- Packaging and Protection requirements
- Recycling Opportunities
- Reuse Opportunities
- European Waste Catalogue reference
- Waste Category
- Waste Recycling and Reuse Appendix
- CAWS/NBS Building Work section: [____]
- NBS/NGS clause number: [____]
- Uniclass/NBS Create Work section: [________]
- NBS Create/NGS clause number: [________]
- WASTE CLAUSE TITLE:
- %%%pending
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
- GBE GBS FMSpec Specification clause
- CPD Seminar
- Schedule
- Method Statement
- Specification
- Availability
- Spares
- Maintenance
- Frequency
- Materials
- Tools
- COBie Data
- CAWS/NBS Building Work section: [____]
- NBS/NGS clause number: [____]
- Uniclass/NBS Create Work section: [________]
- NBS Create/NGS clause number: [________]
- MAINTENANCE CLAUSE:
- %%%pending
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
- N#1677 GBE End of life
- Pre Alteration Audit
- Pre Demolition Audit
- Soft Strip
- Resale Opportunities
- Reuse Applications
- Reuse Accreditation
- Deconstruction
- Accessory Passport
- Demolitions
- Waste Category
- European Waste Catalogue reference
- Recycling Opportunities
- CAWS/NBS Building Work section: [____]
- NBS/NGS clause number: [____]
- Uniclass/NBS Create Work section: [________]
- NBS Create/NGS clause number: [________]
- END OF LIFE CLAUSE:
- %%%pending
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
- G#1098 N#1116 GBE Product Passport
- GBE Accessory Passport
GBE Jargon Buster
- N#1115: Product Passport
- GBE Accessory Passport
- Accessory Passport
- Provenance
- Pre Alteration Audit
- Pre Demolition Audit
- Original Building
- Exposure Condition
- Orientation
- State of repair
- Quantity
- Properties
- Evidence of Properties
- Deconstruction
- Demolitions
- Palleting Packaging and Protection
- Bar Code/QR Codes
- Information Repositry
- Resale Opportunities
- Reuse Applications
- Reuse Accreditation
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
GBE Jargon Buster
G#1333 N#1320 GBE Jargon Buster Themes
- Refurbishment
Jargon Buster Words and Phrases
- Refurbishment
GBE Checklist
- G#606 N#627 GBE New Build Checklist Navigation
- M21 Insulation with Rendered Finish
- G#730 N#752: GBE EBC Checklist Refurbishment
- M21 Insulation with Rendered Finish
- G#1253 N#1252: GBE EBC Checklist Refurbishment Decent Homes
- G#1438 N#1408 GBE Home Improvement Index
GBE Code
GBE Q&A
GBE Defects
- External Wall Insulation: Insulation with Rendered Finish
- GreenDeal & ECO failings
GBE CPD
Theme
- G#1451 N#1419 GBE CPD Refurbishment and Retrofit
- N#601: Refurbishment
GBE Lectures
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 30th December 2015
- Manufacturer’s Environmental Self-Declaration to ISO 14021
- Independent Validation of Manufacturer’s claim to ISO 14021
- Report
- Evidence Documents
- Factory Visits
- Public Disclosure Document Schedule
- URL to Repository for Public Disclosure Documents
- 301 Redirects to maintain links
%%%Pending
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th December 2015
EPD Environmental Product Declaration
This EPD is for the Aerogel insulation only
It was carried out Renuables (UK Consultant and later Sub-Partner of CAPEM LCA & EPD project)
Spaceloft EPD PDF
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 30th December 2015
ThermoPro® Thermo-Trac
GBE Classify
CAWS 1987:
- M21 Insulation with Rendered Finish
CAWS Elemental 2012:
- _
CI/SfB 1976:
- (21) Walls, External Walls
- (21.9) Accessories
- (41) Wall Finishes External
- R Rigid Sheet Work
- P Thick Coating Work
- Z Joints
- h Metals
- m inorganic fibres
- n Plastics
- t fixing and jointing materials
Uniclass 1997:
- J M21 Insulation with Rendered Finish
Uniclass Elemental 2012:
- _
Uniclass for BIM 2015:
- _
GBE Collaborative Service
G#1479 N#1440 GBE Classify
G#1384 N#1360 GBE Classification
N#1441: 17/04/2014: GBE CLASSIFY:
Service to classify literature developed to Samples Box labelling
Pending
Document
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 6th January 2016
GBE Manufacturer
- Enviroform Solutions Ltd. G#4728
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th February 2016
GBE Supplier
- Enviroform Solutions Ltd. G#4728
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 28th February 2016
GBE Installers/Applicators
COMPANY NAME: Many
- Any EWI Manufacturer Approved Installer/Applicator
- No specialist needed
- Suitable for DIY Do It Yourself (bespoke product for DIY)
- Suitable for BIY Build it Yourself (Self-Build)
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 30th December 2015
Plastic face:
- Thermo-Trac
- Colour Options: ______
Aluminium face:
- Thermo-Trac Dynamic/
- Finlock Gutter Fascia/
- Thermo Bead/
- Thermo-Pro/
- Thermo-Flash
Finish: Powder Coated
Colour: [________] BS4800 / RAL reference: [________].
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
18th December 2015 – 29th December 2015
Thermo-Trac
GBE Links
A handbook of thermal bridging details incorporating …
www.constructivedetails.co.uk/wp…/2015/…/CDL-Book-8-Final-Final.pd…
Thermo-Trac. 6. E5. CD0109. Thermo-Pro Fascia. 8. E10. The details have been prepared taking into consideration a range of wall constructions used in the UK …
[PDF] EWI Cold Bridging & Weathering Product Brochure
www.enviroformsolutions.com/…/EWI-Cold-Bridging-Weathering-Prod…
Thermo-Pro-Soil Pipe. 3. Thermo-Pro-Eaves/Gutter. 4. Thermo-Flash. 5. Thermo- Trac. Failure to identify and adequately deal with these cold bridging elements …
© GBE NGS ASWS BrianSpecMan aka Brian Murphy
– 6th January 2016
18th December 2015 – 6th January 2016
