Tecdrit Crushed Micronised Ultrafine Ingredient
GBE > Encyclopaedia > Products > Ingredients > G#10545
Tecdrit Crushed Micronised Ultrafine Ingredient
1 Images:
See 23 GBE Eco for NGS Eco Certificates and Report
2 Ingredients:
- Primary ingredient: Anhydrous calcium sulfate
- Secondary ingredient: Additives
3 Incubator:
- Tecdrit is a bi-product of the chemicals industry.
-
- In the past, this bi-product would have gone to landfill construction, landfill or worse seabed rise.
- Manufacturer’s Self-declaration:
- Resource efficiency: >95% pre-consumer material diverted from waste stream during a manufacturing process
- Independent confirmation of manufacturer’s self-declaration: to BS EN ISO 14021:2016
- NGS Echo: 20/11/2015, confirmed: 27/11/2020
- Anhydrite based screeds perform particularly well with piped under floor heating systems.
4 PASS Ingredient Screening
5 HERACEY (TM)
- GBE Collaborate Services
- GBE HERACEY™ N#1756
- GBE Jargon Buster
- GBE HERACEY™ N#1399
- Pending
- Document
- Healthy
- Environmental
- Resourceful
- Appropriate
- Competent
- Effective
- Yardstick
6 Manufacturers Downloads
- NGS Echo Certificates (see 23 below)
- Brochure (See Manufacturer page)
7 Ingredient Data Sheet
8
9
10
11 Ingredient Specification
Draft Specification
SYNTHETIC ANHYDRITE
- Manufacturer: Anhydritec Ltd.
- Address: 221 Europa Boulevard, Westbrook, Warrington, WA5 7TN
- Telephone 01925 428780 Fax 01925 428788
- E contact@anhydritec.com W www.anhydritec.com
- Product Reference: Tecdrit Crushed
- Product Reference: Tecdrit Micronised
- Product Reference: Tecdrit Ultrafine
- Material(s): Anhydrous calcium sulfate plus functional additive
- Country of origin:
- Primary Resource Manufactured: EU various,
- Additive Manufactured: Germany
- Processed: UK
- Manufacturer’s Self-declaration: to BS EN ISO 14011:2016
- Resource efficiency:
- >95% pre-consumer material diverted from waste stream during a manufacturing process
- Independent confirmation of manufacturer’s self-declaration:
- NGS Echo: to BS EN ISO 14021:2016
- Date: 20/11/2015, renewed: 27/11/2020, valid for 5 years
- Construction Application: Liquid Applied Screed
- Environmental selection and substitution criteria:
- Cement:Sand Screed replacement
- Low carbon alternative to Cement:Sand screed
- Thermal conductivity improvement over cement:sand screed
- Properties: selection and substitution criteria:
- Self-levelling
- Dimensional stability: No drying shrinkage and curling
- Rapid set and early follow on trades
- Thinner screeds possible
- Improved strength and crush resistance
12 Application Data Sheet
Applications:
Industrial Applications:
- Synthetic anhydrite can be used as an additive for many industrial applications, such as:
- Cement production: to bring specific properties such as set time controller, enhancer of mechanical strength, shrinkage inhibiter
- Aerated block production: to generate hydrogen emission when the anhydrite reacts with the aluminum powder.
- Fertilizer production: to bring calcium and sulfate as fertilizing elements or as a mineral filler.
- Inerting industry: to neutralize polluted soil in order to prevent further pollution spread.
Construction Applications:
Floor Screed Solutions:
- In construction, anhydrite can advantageously replace traditional cement, as a binder for screed mortars.
- Anhydrite is widely used in floor screed applications because of its numerous advantages:
- better fluidity for self-levelling
- greater dimensional stability
- high mechanical strength
- outstanding thermal conductivity
- low carbon compared to cement based screed
13 Accessories
14 System Recipes
15 Elemental Assemblies
16 Elemental Assembly Specification
17 Workmanship Specification
18 Waste Specification
19 FM Spec In Use Maintenance Specification
20 End Of Life Options
21 Ingredient Products Passport
22 See Also
GBE Manufacturers
- Anhydritec Limited (Manufacturer) G#10459
GBE Products
- Gyvlon Screed (Product) G#10522
23 GBE Echo
GBE Collaborate Services
- Manufacturer’s Environmental Self-Declaration to ISO 14021:2016
- Independent Validation of Manufacturer’s claim to ISO 14021:2016
- Assessed in 2015 and 2020
- Valid for 5 years
- Report: Is available via local contact via contact@anhydritec.com
- Cover shown below
- Evidence Documents
- Only available upon request (contact above)
- Factory Visits
- Photographs of 2015 visit in report above
- Public Disclosure Document Schedule
- Part of report above
NGS National Green Specification
NGS Echo Supporting Report
NGS Echo Certificates
The following 2020 certificates replace the 2015 editions:
Tecdrit Crushed, Tecdrit Micronised Anhydritec Ltd. UK
Tecdrit Crushed, Tecdrit Micronised Anhydritec GmbH Germany
Tecdrit Crushed, Tecdrit Micronised Anhydritec BV Netherlands
Tecdrit Crushed, Tecdrit Micronised, Tecdrit Ultrafine Anhydritec SAS France
24 LCA and EPD
25 Classify
26 GBE Manufacturer
- Anhydritec Ltd. G#10459
- ANHYDRITEC SAS, 635 avenue Louis Boudin – 84800 Isle sur la Sorgue, FR France
- ANHYDRITEC BV, Centraleweg 10 – NL-4931 NB Geertruidenberg, NL Netherlands
- ANHYDRITEC GmbH, Frankfurter Landstraße 2-4, D-61440 Oberursel D Germany
- ANHYDRITEC Ltd – Unit 221, Europa Boulevard – Westbrook, Warrington – WA5 7TN GB Great Britain
Company Supply Chain Activities: Manufacturer/Supply Direct
27 GBE Suppliers
- Anhydritec Ltd. G#10459
- ANHYDRITEC SAS, 635 avenue Louis Boudin – 84800 Isle sur la Sorgue, FR France
- ANHYDRITEC BV, Centraleweg 10 – NL-4931 NB Geertruidenberg, NL Netherlands
- ANHYDRITEC GmbH, Frankfurter Landstraße 2-4, D-61440 Oberursel D Germany
- ANHYDRITEC Ltd – Unit 221, Europa Boulevard – Westbrook, Warrington – WA5 7TN GB Great Britain
Company Supply Chain Activities: Manufacturer/Supply Direct
28 Installer/Applicator
© GBE GBC GBL NGS ASWS Brian Murphy aka BrianSpecMan **
16th March 2016 – 29th November 2020
